Excellence
HVAC Repair in Brushy Creek, TX
We install, repair, and maintain HVAC and refrigeration systems
License:TACLA00146407C
Proudly Powered by MikeNeat LLC
License:TACLA00146407C
Proudly Powered by MikeNeat LLC
Heating and Cooling Contractor
AC Not Cooling — We Fix It
Blowing Warm Air — We Repair It
Leaking Refrigerant — Fixed Fast
Unusual Noises or Smells — Solved
Frozen Coil / Blocked Drain — Cleared
Thermostat Not Responding — Fixed
AC Not Cooling — We Fix It
Blowing Warm Air — We Repair It
Leaking Refrigerant — Fixed Fast
Unusual Noises or Smells — Solved
Frozen Coil / Blocked Drain — Cleared
Thermostat Not Responding — Fixed
Brushy Creek, TX • HVAC Repair
HVAC Repair in Brushy Creek, TX — Fast Diagnostics & Clear Options
For Brushy Creek homeowners, TexasBree focuses on accurate HVAC diagnostics and repairs that last. If your system is not cooling, not heating, or not running, we’ll pinpoint the cause and give you clear, upfront options. We commonly dispatch around Brushy Creek West and Walsh Ranch and nearby areas off TX-45, US-183. For quick troubleshooting, check the AC not cooling / symptoms hub before we arrive.
Cooling
AC Repair (Not Cooling)
AC Repair • placeholder image
Air conditioner acting up in Brushy Creek? From “not cooling” to “not running,” we troubleshoot first and recommend the most cost‑effective fix. Use the AC symptoms guide for symptom‑by‑symptom tips.
High-value AC problems we fix
- AC not cooling / warm air from vents
- AC not working or not running (no outdoor unit / no fan)
- Weak airflow, icing, or uneven temperatures
- Water leaks (drain line, pan, coil-related) + breaker trips
TexasBree AC repair — what you get
- Precision diagnostics (no guessing)
- Straight answers + options you can choose from
- Clean, careful work — respect for your home
- Same-day service when available
Heating
Furnace Repair (Not Heating)
Furnace Repair • placeholder image
For Brushy Creek winter calls, we handle “not heating” and safety shutdowns fast — ignition, airflow, controls, and gas safety checks. You’ll get a clear plan and estimate before repairs start. Visit: Furnace Repair Brushy Creek.
Common “not heating” causes we diagnose
- Ignition / igniter issues and failed startup sequence
- Flame sensor problems + safety lockouts
- Pressure switch / inducer faults and venting-related trips
- Limit switch trips from airflow issues or overheating
How we restore heat fast
- Safe startup checks + error/LED codes
- Airflow basics: filter, blower, supply/return
- Electrical + low-voltage control verification
- Clear options + estimate before repairs begin
Heating + Cooling
Heat Pump Repair (Not Heating + Not Cooling)
Heat Pump Repair • placeholder image
Heat pump problems in Brushy Creek can look like “not heating,” “not cooling,” or constant defrost. We test, verify, and repair with clear options and pricing up front. Learn more: Heat Pump Repair Brushy Creek.
Common heat pump problems we fix
- Not switching heating ↔ cooling (reversing valve symptoms)
- Defrost issues / outdoor coil icing
- AUX heat running too often + high electric bills
- Short cycling, noisy operation, or weak airflow
What we check first
- Thermostat signals + low-voltage controls
- Airflow basics and coil condition
- Outdoor unit electrical + defrost control
- Clear options + estimate before repairs
Brushy Creek HVAC Service Area — Map & Quick Coverage
We cover Brushy Creek and nearby neighborhoods for HVAC Services, replacement, maintenance, and commercial refrigeration support. Text us your ZIP first so we can confirm coverage.
Brushy Creek, Texas – February 2026. HVAC Services near me.
Brushy Creek ZIP Codes We Serve
Common ZIP codes we see for dispatch in Brushy Creek and nearby neighborhoods:
78613 · 78681 · 78717
Neighborhoods / areas: Cat Hollow · Woods of Brushy Creek · Fern Bluff · Stone Canyon · Oak Brook · Great Oaks · Brushy Creek North
Brushy Creek Emergency HVAC Repair — When It Can’t Wait
For urgent or after‑hours issues, visit our Emergency HVAC Repair page. After‑hours labor is billed at 2× the standard rate.
HVAC Repair Pricing
Below are typical repair ranges we see most often. Final pricing depends on the exact diagnosis, parts availability, system type, and access. We always confirm the root cause first — then you choose the repair option.
DIAGNOSTIC
Service Call & System Diagnosis
We identify the real cause behind symptoms like AC not cooling, furnace not heating, heat pump not working, weak airflow, leaks, or a system not running — then show you repair options.
$95 diagnostic
Waived when you approve the repair during the same visit.
TYPICAL RANGES
Typical Repair Ranges — Labor with Parts
| Capacitor replacement | $199–$265 |
| Contactor replacement | $215–$295 |
| Drain line flush & treatment Common cause of water leaks + safety switch trips | $165–$225 |
| R‑410A refrigerant recharge Per lb (after leak check / diagnostics) | $95/lb |
| Condenser fan motor replacement | $495–$895 |
| ECM blower motor replacement | $895–$1,495 |
| TXV valve replacement | $995–$1,875 |
| Compressor replacement | $1,995–$3,295+ |
Note: Ranges above are typical for many residential systems, but exact pricing can vary based on parts,
system age/condition, accessibility (attic/roof), and whether additional issues are found.
Furnace repairs also vary by system type and safety conditions — we confirm diagnosis first and show options before any work begins.
Why Brushy Creek Residents Trust TexasBree
Fast response is great — but accuracy matters more. TexasBree combines thorough troubleshooting with clear communication, so you know what’s wrong and what it will cost. From “not cooling” calls to “not heating” shutdowns, we help Brushy Creek homes get stable comfort again.
WHY CHOOSE US
Clear diagnosis. Strong workmanship. No drama.
Same-day when available
Upfront diagnostic & options
Clean, careful work
Local dispatch
- Root-cause troubleshooting for “not cooling / not heating / not running” calls
- Honest recommendations — repair vs replace guidance
- Airflow + electrical + controls checked (not just one part swap)
- Reliable repairs with verification after the fix
- Respect for your home — shoe covers, clean-up, straight communication
- HVAC repair in Brushy Creek — AC, furnace, and heat pump specialists
Pro tip: When you text, include your ZIP + symptom:
“AC not cooling”, “furnace not heating”, “heat pump not working”, “not running”, “leaking”, or “breaker trips” —
it helps us route the right tech faster.
BOOK NOW
Fast scheduling — clear next steps
Need help today? Text your ZIP + what the system is doing (and a thermostat photo if possible). We’ll confirm the next available time. Or book online in 30 seconds.
- Symptom: not cooling / not heating / not working / not running
- Home type: house / condo / small business
- Photo: thermostat screen (optional, but helpful)
We keep it simple: diagnose → explain options → repair → verify.
TESTIMONIALS
Rated 5 Stars by Brushy Creek Homeowners
Reliable, honest HVAC service backed by real results
and real reviews.
0
Since
0
Installations
0
Repairs
Quick answers
FAQ: HVAC Repair in Brushy Creek, TX
If you’re in Brushy Creek and your system is not working, this FAQ covers the basics: same‑day service, common failures, and when repair vs replace makes sense. For quick dispatch, call or text 512-638-4713.
Often, yes — when the schedule and parts line up we can provide same‑day HVAC repair. Coverage varies by ZIP — common dispatch ZIPs include 78717.
If you text your ZIP and a short symptom (“not cooling”, “not heating”, “tripping breaker”), we can route you faster and bring the right parts.
Always diagnostic first. We verify the failure with measurements/tests, then present a repair plan and cost. No surprise work starts without approval.
Usually it’s airflow or a failed electrical component — but refrigerant and control issues also happen. We’ll check pressures/temperatures (when needed) and verify the failure before quoting repair.
When the outdoor unit runs but comfort doesn’t change, we inspect the indoor coil, airflow, and refrigerant performance. A frozen coil, weak blower, dirty filter/coil, or refrigerant problem are common culprits.
Most “not heating” calls come down to ignition or safety shutdowns: ignitor, flame sensor, pressure switch, or airflow limits. We troubleshoot the sequence to confirm the true cause.
Treat gas/CO as an emergency. Get everyone outside, ventilate if safe to do so, and contact the gas company or 911. Do not run the equipment until it’s inspected.
Defrost can look like “not heating” for a few minutes. Steam from the outdoor unit can also be normal. Problems show up when defrost is constant or the unit can’t recover after the cycle.
Frequent trips indicate an overload or short. We measure current draw and inspect components to prevent further damage. If there’s any burning smell, shut it down and call.
Yes — we handle residential systems and many light commercial setups (small rooftops, split systems, and heat pumps). If it’s a larger or specialized system, we’ll tell you up front and point you in the right direction.
We compare repair cost vs system age/efficiency and how often it’s been breaking down. If the repair is minor, we repair. If it’s a major component on an aging system, we’ll show replacement options.
Make sure the filter is clean, vents are open, and the thermostat is set correctly. If power is tripped, don’t keep resetting it — tell us what happened. Photos of the equipment label are very helpful.
Workmanship is warrantied; part warranties vary by component/brand. We’ll document warranty terms clearly when the job is complete.
LET'S GET STARTED
Book now and enjoy fast, reliable HVAC service.
Upgrade your comfort with a free consultation and expert HVAC help from Bree HVAC Contractor.
We’ll explain your options, schedule the work, and keep your home comfortable year‑round.
